StealthPatrol Tab


In this Topic Hide

Access StealthPatrol Tab

StealthPatrol Main Screen


Access StealthPatrol Tab

Click the StealthPatrol tab on the Tab Bar of PerfectDisk.

StealthPatrol Main Screen

AutoMode_MainScrn.jpg

The StealthPatrol tab allows you to enable/disable OptiWrite and Auto-Optimization.

Screen Saver Mode and Automatic Mode are mutually exclusive on a per drive basis, both cannot be enabled on the same drive.

The StealthPatrol tab is used to configure OptiWrite and Auto-Optimization on selected drives. The Information on the screen is divided into the following sections:

Section

Description

OptiWrite

Auto_OptiWrite.jpg

Displays the list of drives on your machine and allows you to enable/disable OptiWrite on each drive. Toggle the ON or OFF button next to each drive to enable/disable. See the figure above. OptiWrite is enabled on drive(s) that show ON status.

Note: Excluded drives will not appear here.

Auto-Optimization

AutoMode_Auto.jpg

In this section you can individually enable Screen Saver Mode or Automatic Mode for each drive. When the Status is "ON" then you can enable Mode (Automatic or Screen Saver) for a drive. When the Status is "OFF", setting Mode will not apply. Mode only applies when the Status is "ON". If Status is switched to OFF (Disabled), Automatic and Screen Saver Modes will be disabled. If Status is switched to "ON", Automatic or Screen Saver Modes can be selected.

Auto-Optimization Exclusion Settings

StealthPatrol_SetProp.jpg

Select times and days of the week when you do not want auto-optimization to occur. If any days/times are configured, PerfectDisk's StealthPatrol technology will not resolve fragmentation on your system during the indicated days/times. Click the days in the calendar to exclude. Red shaded days/times indicate when PerfectDisk will NOT automatically optimize your system. Green shaded days/times indicates when PerfectDisk will automatically optimize your system.

Do not optimize when the following programs are running

StealthPatrol_ApplExcl.jpg

In the section labeled Do not optimize when the following programs are running, add any desired applications to this list. Click the Add button and select the application(s) to include. This ensures PerfectDisk's StealthPatrol technology does not start optimization when the listed applications are running.

The Remove button can be used to remove any selected application from the list. The Remove All button is used to remove all applications from the list at once.

 

Related Topics

§          Getting Started with PerfectDisk

§          Configuring Automatic Mode

§          Configuring Screen Saver Mode